Electric Fence Accessories

Featured Specifications
• Ideal for use on shorter, less frequently moved fences
• Easy to maintain reversible and replaceable hub
• Durable zinc coated frame and UV resistant hub
• Conveniently hooks directly to fence or reel stand
• Holds 1640 ft Poly Wire and 656 ft of 0.5 in Tape

Manufacturer Description
Lightweight and strong, for use on shorter, less frequently moved portable fences.

Featured Specifications
• Splice Clamp
• Joining or repairing rolls of electric rope, braid, or polywire
• Terminate the fence line at the end of a run using the R-65 Corner Pulley
• Provides a strong connection with maximum conductivity
• 4 per pack

Manufacturer Description
A splice clamp for joining or repairing rolls of electric rope, braid, or polywire and to terminate the fence line at an end of a run using the R-65 Corner Pulley. This clamp provides a strong connection with maximum conductivity.

Featured Specifications
•  Install at strategic locations for convenient visibility including driveways and near the home
•  Highly visible LED flashes to indicate fence is working effectively. Is easily visible during day and night (up to 3,000' at night)
•  Low voltage cut off so will not flash if the fence voltage is too low
•  Quick and easy installation, simply place earth stake in the ground and clip onto fence wire or tape  
•  Water and UV resistant for long life
•  No batteries required. Uses power from the fence

Manufacturer Description
For instant reassurance that your fence is working. Place permanently on your fence line and simply look for the flash when you pass by.  No batteries required.

Featured Specifications
• One-handed gate latch
• Includes two stapes and 14" chain
• Secure against most animals
• Can be padlocked
• Gold Passivate

Manufacturer Description
One-handed operation, even wearing gloves.

Featured Specifications
• 3 feet
• Galvanized
• Ground rod
• T handle
• Ideal for portable fencing

Manufacturer Description
Galvanized T-Handle Ground Rod does not rust or corrode.  The T-Handle also makes it easier to move in temporary fencing applications or insert in hard ground conditions.

Cliplock operates with a smooth clicking action in any position.
- G69530 tool required.
- Galvanized steel.
- Works on high tensile, barb- and woven wire.
NOTE: Styles, colors and brands may vary.

Featured Specifications
• Stainless-steel splice buckle
• Used for joining rolls of 1 1/2" polytape or splicing torn material
• 4 per pack

Manufacturer Description
Stainless-steel splice buckle used for joining rolls of 1 1/2” polytape or splicing torn material.

Featured Specifications
• Used to attach the fence charger to the fence, strand for strand, and connection cable under gates
• It bolts to a hole in the tensioner ring hook for a positive yet easy-to-remove connection
• Only use high-voltage fence wire rated for a minimum of 12,000 volts
• 4 per pack

Manufacturer Description
Used to attach the fence charger to the fence, strand to strand, and connection cable under gates. It bolts to a hole in the tensioner ring hook for a positive yet easy-to-remove connection. Only use high-voltage fence wire rated for a minimum of 12,000 volts.

Featured Specifications
• Fits all 1 1/2" polytape
• Stainless-steel triangular tensioner holds the polytape tight, deters tearing from impact, and allows easy retightening
• Tensioners swivel back and forth and rotate around the plastic insulated post bracket allowing for up and down grade changes
• Prevents tape from bunching in the tensioner
• 2 per package

Manufacturer Description
Fits all 1 1/2” polytape. The stainless-steel triangular tensioner holds the polytape tight, deters tearing from impact, and allows easy retightening if the polytape becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated post bracket allowing for up and down grade changes. This prevents the tape from bunching in the tensioner. 2 per package

Featured Specifications
• Fits all 1.5 inch polytape
• Stainless steel
• Comes in a pack of 2
• Color may vary

Manufacturer Description
Fits all 1½” polytape. The stainless-steel triangular tensioner holds the polytape tight, deters tearing from impact, and allows easy retightening if the polytape becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated post bracket allowing for up and down grade changes. This prevents the tape from bunching in the tensioner.

1/2", Copper Ground Rod Clamp, Wire Range #10 Minimum To #2 Maximum Awg, Clamshell.

Featured Specifications
• Most popular option for fast wind in and out (3:1 gear ratio) on standard length portable fences
• Heavy duty gear box for long life
• Large hook with transport lock for easy, secure attachment to ATV or fence wire
• Impact resistant reel guide for tangle free operation
• Fully galvanized frame and white high impact hub for durability in tough farming/ranching conditions
• Shatter proof reel lock
• Long crank arm for better leverage
• Large comfortable hand grip with knuckle guard for safer use
• Unique locking device keeps gear in place

Manufacturer Description
Built to last, the Geared Reel is durable and easy to use, with practical features such as a transport lock and heavy duty gearbox for simple fence set up.

Lead Set for the following Energizers: S10, S17, B700 & B1600.

Featured Specifications
• Safe-Fence End tensioner
• Gate Hook Plate

Manufacturer Description
A combination of the SAFE-FENCE End Tensioner and the Gate Hook Plate.

Featured Specifications
• Conducts power evenly
• Fits 1/2" to 2" polytape

Manufacturer Description
A good electrical connection is the most important part of installation. The Polytape-to-Energizer Power Connector conducts power evenly and fits 1/2" to 2" Polytape.